BRAND: ARAI
MODEL: X-TEND
TYPE: MOTO
COLOR: PEARL WHITE
DESCRIPTION
Based on the legendary SZ series, which for years has been the reference point in the world of jet helmets, Arai has developed the brand new X-Tend line, able to offer the rider more protection and comfort together with an even more enveloping fit, which it increases its protection without forcing it to give up the feeling of freedom and the excellent view that only a jet helmet can offer.
.
PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE
FEATURES
SFL (SUPER FIBER LAMINATED) CONSTRUCTION
Outer shell made with SFL (Super Fiber Laminated) technology that guarantees maximum safety and comfort for a light but extremely resistant helmet. The Super Fiber patented by Arai is one of the best glass fibers for strength; its specific gravity is 2.4 and it is 40% stronger in extension and tensile strength than common glass fiber.
EXTENDED OUTER SHELL
The outer shell wider than 3 cm in the lower area of the helmet ensures greater safety, going to protect an area identified as the one most affected by impacts in the event of a fall.
REINFORCEMENT BUMPER AT THE BASE OF THE HELMET
The reinforcement "bumpers" placed on the two sides of the helmet further increase the rigidity and strength of the outer shell.
EXTENDED PILLOWS IN EPS
The cheek pads are covered with EPS fabric to further increase protection from side impacts while their shape, more elongated in the lower area, perfectly follows the line of the outer shell to ensure maximum comfort and an even more enveloping fit, which keeps the helmet in perfect position even at high speeds.
REMOVABLE AND WASHABLE INTERIORS
Fully removable and washable interior; Interior in different thicknesses are available as an option to customize the fit.
EXTERNAL SUPPORTS INTEGRATED IN THE SHELL
The new external supports are even better integrated in the shell to ensure perfect aerodynamics combined with a "stylish" design.
VISOR WITH A MORE ROUNDED SHAPE
The more rounded shape of the visor allows a clear vision, without distortion of the image, and integrates perfectly in the helmet line. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
PERFECT COVERING OF THE SIDE AIR VENTS
The perfect coverage of the side air vents located in the lower rear area of the helmet helps to significantly reduce the noise caused by the wind, integrating perfectly with the helmet profile.
INTEGRATED AIR INTAKES IN THE NECK
Hot air is conveyed outside the helmet thanks to the air intakes integrated in the neck roll.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of side air vents.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a metal cone of 3kg, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of the outer shell.
BRAND: ARAI
MODEL: X-TEND
TYPE: MOTO
COLOR: PEARL WHITE
DESCRIPTION
Based on the legendary SZ series, which for years has been the reference point in the world of jet helmets, Arai has developed the brand new X-Tend line, able to offer the rider more protection and comfort together with an even more enveloping fit, which it increases its protection without forcing it to give up the feeling of freedom and the excellent view that only a jet helmet can offer.
.
PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE
FEATURES
SFL (SUPER FIBER LAMINATED) CONSTRUCTION
Outer shell made with SFL (Super Fiber Laminated) technology that guarantees maximum safety and comfort for a light but extremely resistant helmet. The Super Fiber patented by Arai is one of the best glass fibers for strength; its specific gravity is 2.4 and it is 40% stronger in extension and tensile strength than common glass fiber.
EXTENDED OUTER SHELL
The outer shell wider than 3 cm in the lower area of the helmet ensures greater safety, going to protect an area identified as the one most affected by impacts in the event of a fall.
REINFORCEMENT BUMPER AT THE BASE OF THE HELMET
The reinforcement "bumpers" placed on the two sides of the helmet further increase the rigidity and strength of the outer shell.
EXTENDED PILLOWS IN EPS
The cheek pads are covered with EPS fabric to further increase protection from side impacts while their shape, more elongated in the lower area, perfectly follows the line of the outer shell to ensure maximum comfort and an even more enveloping fit, which keeps the helmet in perfect position even at high speeds.
REMOVABLE AND WASHABLE INTERIORS
Fully removable and washable interior; Interior in different thicknesses are available as an option to customize the fit.
EXTERNAL SUPPORTS INTEGRATED IN THE SHELL
The new external supports are even better integrated in the shell to ensure perfect aerodynamics combined with a "stylish" design.
VISOR WITH A MORE ROUNDED SHAPE
The more rounded shape of the visor allows a clear vision, without distortion of the image, and integrates perfectly in the helmet line. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
PERFECT COVERING OF THE SIDE AIR VENTS
The perfect coverage of the side air vents located in the lower rear area of the helmet helps to significantly reduce the noise caused by the wind, integrating perfectly with the helmet profile.
INTEGRATED AIR INTAKES IN THE NECK
Hot air is conveyed outside the helmet thanks to the air intakes integrated in the neck roll.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of side air vents.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a metal cone of 3kg, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of the outer shell.
BRAND: ARAI
MODEL: X-TEND
TYPE: MOTO
COLOR: PEARL WHITE
DESCRIPTION
Based on the legendary SZ series, which for years has been the reference point in the world of jet helmets, Arai has developed the brand new X-Tend line, able to offer the rider more protection and comfort together with an even more enveloping fit, which it increases its protection without forcing it to give up the feeling of freedom and the excellent view that only a jet helmet can offer.
.
PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE
FEATURES
SFL (SUPER FIBER LAMINATED) CONSTRUCTION
Outer shell made with SFL (Super Fiber Laminated) technology that guarantees maximum safety and comfort for a light but extremely resistant helmet. The Super Fiber patented by Arai is one of the best glass fibers for strength; its specific gravity is 2.4 and it is 40% stronger in extension and tensile strength than common glass fiber.
EXTENDED OUTER SHELL
The outer shell wider than 3 cm in the lower area of the helmet ensures greater safety, going to protect an area identified as the one most affected by impacts in the event of a fall.
REINFORCEMENT BUMPER AT THE BASE OF THE HELMET
The reinforcement "bumpers" placed on the two sides of the helmet further increase the rigidity and strength of the outer shell.
EXTENDED PILLOWS IN EPS
The cheek pads are covered with EPS fabric to further increase protection from side impacts while their shape, more elongated in the lower area, perfectly follows the line of the outer shell to ensure maximum comfort and an even more enveloping fit, which keeps the helmet in perfect position even at high speeds.
REMOVABLE AND WASHABLE INTERIORS
Fully removable and washable interior; Interior in different thicknesses are available as an option to customize the fit.
EXTERNAL SUPPORTS INTEGRATED IN THE SHELL
The new external supports are even better integrated in the shell to ensure perfect aerodynamics combined with a "stylish" design.
VISOR WITH A MORE ROUNDED SHAPE
The more rounded shape of the visor allows a clear vision, without distortion of the image, and integrates perfectly in the helmet line. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
PERFECT COVERING OF THE SIDE AIR VENTS
The perfect coverage of the side air vents located in the lower rear area of the helmet helps to significantly reduce the noise caused by the wind, integrating perfectly with the helmet profile.
INTEGRATED AIR INTAKES IN THE NECK
Hot air is conveyed outside the helmet thanks to the air intakes integrated in the neck roll.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of side air vents.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a metal cone of 3kg, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of the outer shell.
BRAND: ARAI
MODEL: X-TEND
TYPE: MOTO
COLOR: PEARL WHITE
DESCRIPTION
Based on the legendary SZ series, which for years has been the reference point in the world of jet helmets, Arai has developed the brand new X-Tend line, able to offer the rider more protection and comfort together with an even more enveloping fit, which it increases its protection without forcing it to give up the feeling of freedom and the excellent view that only a jet helmet can offer.
.
PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE
FEATURES
SFL (SUPER FIBER LAMINATED) CONSTRUCTION
Outer shell made with SFL (Super Fiber Laminated) technology that guarantees maximum safety and comfort for a light but extremely resistant helmet. The Super Fiber patented by Arai is one of the best glass fibers for strength; its specific gravity is 2.4 and it is 40% stronger in extension and tensile strength than common glass fiber.
EXTENDED OUTER SHELL
The outer shell wider than 3 cm in the lower area of the helmet ensures greater safety, going to protect an area identified as the one most affected by impacts in the event of a fall.
REINFORCEMENT BUMPER AT THE BASE OF THE HELMET
The reinforcement "bumpers" placed on the two sides of the helmet further increase the rigidity and strength of the outer shell.
EXTENDED PILLOWS IN EPS
The cheek pads are covered with EPS fabric to further increase protection from side impacts while their shape, more elongated in the lower area, perfectly follows the line of the outer shell to ensure maximum comfort and an even more enveloping fit, which keeps the helmet in perfect position even at high speeds.
REMOVABLE AND WASHABLE INTERIORS
Fully removable and washable interior; Interior in different thicknesses are available as an option to customize the fit.
EXTERNAL SUPPORTS INTEGRATED IN THE SHELL
The new external supports are even better integrated in the shell to ensure perfect aerodynamics combined with a "stylish" design.
VISOR WITH A MORE ROUNDED SHAPE
The more rounded shape of the visor allows a clear vision, without distortion of the image, and integrates perfectly in the helmet line. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
PERFECT COVERING OF THE SIDE AIR VENTS
The perfect coverage of the side air vents located in the lower rear area of the helmet helps to significantly reduce the noise caused by the wind, integrating perfectly with the helmet profile.
INTEGRATED AIR INTAKES IN THE NECK
Hot air is conveyed outside the helmet thanks to the air intakes integrated in the neck roll.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of side air vents.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a metal cone of 3kg, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of the outer shell.
BRAND: ARAI
MODEL: X-TEND
TYPE: MOTO
COLOR: PEARL WHITE
DESCRIPTION
Based on the legendary SZ series, which for years has been the reference point in the world of jet helmets, Arai has developed the brand new X-Tend line, able to offer the rider more protection and comfort together with an even more enveloping fit, which it increases its protection without forcing it to give up the feeling of freedom and the excellent view that only a jet helmet can offer.
.
PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE
FEATURES
SFL (SUPER FIBER LAMINATED) CONSTRUCTION
Outer shell made with SFL (Super Fiber Laminated) technology that guarantees maximum safety and comfort for a light but extremely resistant helmet. The Super Fiber patented by Arai is one of the best glass fibers for strength; its specific gravity is 2.4 and it is 40% stronger in extension and tensile strength than common glass fiber.
EXTENDED OUTER SHELL
The outer shell wider than 3 cm in the lower area of the helmet ensures greater safety, going to protect an area identified as the one most affected by impacts in the event of a fall.
REINFORCEMENT BUMPER AT THE BASE OF THE HELMET
The reinforcement "bumpers" placed on the two sides of the helmet further increase the rigidity and strength of the outer shell.
EXTENDED PILLOWS IN EPS
The cheek pads are covered with EPS fabric to further increase protection from side impacts while their shape, more elongated in the lower area, perfectly follows the line of the outer shell to ensure maximum comfort and an even more enveloping fit, which keeps the helmet in perfect position even at high speeds.
REMOVABLE AND WASHABLE INTERIORS
Fully removable and washable interior; Interior in different thicknesses are available as an option to customize the fit.
EXTERNAL SUPPORTS INTEGRATED IN THE SHELL
The new external supports are even better integrated in the shell to ensure perfect aerodynamics combined with a "stylish" design.
VISOR WITH A MORE ROUNDED SHAPE
The more rounded shape of the visor allows a clear vision, without distortion of the image, and integrates perfectly in the helmet line. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
PERFECT COVERING OF THE SIDE AIR VENTS
The perfect coverage of the side air vents located in the lower rear area of the helmet helps to significantly reduce the noise caused by the wind, integrating perfectly with the helmet profile.
INTEGRATED AIR INTAKES IN THE NECK
Hot air is conveyed outside the helmet thanks to the air intakes integrated in the neck roll.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of side air vents.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a metal cone of 3kg, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of the outer shell.