OPEN FACE HELMET MOTO AND SCOOTER ARAI SZ-F BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.
BRAND: ARAI
MODEL: SZ-F
TYPE: MOTO
COLOR: BLAST YELLOW

DESCRIPTION
The SZ-F is the perfect choice for business travelers or tourists. The large visor offers excellent protection from weather conditions, while comfort and fit make it comfortable to use even for several hours. The SZ-F offers an efficient ventilation system with multiple air intakes and extractors. The removable cheek pads allow you to customize the fit. Properties that have made the SZ-F a favorite among bikers in search of comfort all day long.

PRIMA DELL'ACQUISTO VERIFICARE LE MISURE NELLA SEGUENTE TABELLA GUIDA TAGLIE

FEATURES
ERGONOMIC SHELL
The ergonomic design allows a more enveloping fit in the lower part of the helmet and at the same time improves the linearity and elegance of the profile, together with a perfect balance.
VENTILATION TDF & TDR
The TDF & TDR ventilation system, embedded in the shell, allows for greater aerodynamics and silent running. Through two front air intakes and two rear air extractors, it allows a perfect introduction of fresh air inside the helmet and a better extraction of hot air, for comfort suitable for long journeys.
VISOR SZ
The aerodynamically shaped SZ visor is 3D pre-formed and offers protection from UV rays. Optically corrected, it allows a clear vision, without distortion of the image. The visor is longer than that of traditional Jet helmets to better protect against turbulence and is therefore suitable for long journeys.
VISOR STOP
The SZ visor is equipped with a locking system that prevents accidental opening.
REINFORCEMENT RIBS
To further increase the rigidity of the shell, the helmet is equipped with stiffening ribs at the base, to ensure maximum safety even in the area of ​​side air vents.
ARAI FIBER GLASS
The outer shell in Arai Fiber Glass is resistant, light and provides greater comfort than traditional helmets of this type.
REMOVABLE AND WASHABLE PILLOWS
The hypoallergenic anti-sweat pillows are removable and washable. The cheek pads in different thicknesses are available as optional and allow the best adaptation to the morphology of the face.
BUILT-IN LINER
Pillows made of shock-absorbing material to further increase the safety of the helmet.
IMITATION LEATHER COVERING
Pillows and neck roll are covered with imitation leather.
POLYSTYRENE IN A SINGLE DIFFERENTIATED DENSITY SHELL
The exclusive Arai technology allows you to create a shock-absorbing inner shell with multiple different densities in a single element, rather than assembling elements of different densities to to obtain the final inner shell.
PENETRATION TEST PASSED
Even if not required by current European legislation, Arai tests its helmets with an additional safety check: the penetration test subjects the helmet to the impact of a 3kg metal cone, from a height of 3 meters.
BROW VENT
The air intakes positioned on the visor ensure greater ventilation in the upper part of the helmet, avoiding weakening the front area of ​​the outer shell.
LRS
Lever Release System. The visor is quickly released through a practical lever, without the aid of any tool and allows a practical removal and cleaning of the lens.
REMOVABLE SUPPORTS
The external supports are separated from the visor, so they can be replaced independently if necessary.